TAO II Please read it before use

This product is an effecter for exclusive use of TACHYON AIRIA.
Before use, you have to update firmware of TACHYON AIRIA to a TAO II -adaptive version.
Please update in referring to update software.

* When you update it, PC and update device kit is necessary. (The correspondence OS)

* Please specify with "Request to TAOII-Update" by all means. (Please pay shipping cost by yourself.) 

* TACHYON AIRIA where firmware for exclusive use of TAOII was installed cannot perform setting changes in 1st Gen TAO.
Please change a setting mode of TACHYON AIRIA to a program card mode when using TAOII. (TACHYON AIRIA instruction manual P.10)

Regardless of wired communication or wireless communication, because the use with the ESC mode is not possible, please be careful.

Not only at the time of a setting change in TAOII, please always use it as a program card mode during a run.

이 제품은 TACHYON AIRIA 전용 이펙터입니다.
사용하기 전에 TACHYON AIRIA의 펌웨어를 TAO II 대응 버전으로 업데이트해야합니다. 업데이트 소프트웨어
를 참조하여 업데이트하십시오.

* 업데이트시 PC 및 업데이트 장치 키트가 필요합니다. (대응 OS)

* 반드시 "TAOII-Update 요청"에서 지정하십시오. (배송비는 본인 부담입니다.)

* TAOII 전용 펌웨어가 설치된 TACHYON AIRIA는 1 세대 TAO에서 설정 변경을 할 수 없습니다.
TAOII 사용시 TACHYON AIRIA의 설정 모드를 프로그램 카드 모드로 변경하세요. (TACHYON AIRIA 취급 설명서 P.10)

유선 통신이나 무선 통신에 관계없이 ESC 모드로는 사용할 수 없으므로주의하시기 바랍니다.

TAOII에서 설정 변경시뿐만 아니라, 런 중에는 항상 프로그램 카드 모드로 사용하십시오.

Generally, a program card for E.S.C. is external equipment to more easily operate various set points programmed beforehand by the E.S.C. In contrast, many users give a high evaluation to TAO as a setting device to be able to write a new program.

TAOII enabled more detailed and free setting depending on a category and a course layout. It leads to the setting of the Boost/Turbo not to mention each frequency and Drive/Brakes. These are based on data from user of 1st gen.TAO

Driver can easily confirm these set points at hand, and the transmission, the setting change in AIRIA is possible by wireless, too.

In addition, It became able to display the change of various data on the running vehicle. (E.S.C./ motor temperature and battery voltage etc.)

Furthermore, you can control the various devices that planned release via a brain unit in future. 

TAOII is a totally new development type effector that unifies the whole vehicle.

일반적으로 ESC 용 프로그램 카드는 ESC에서 미리 프로그램 된 다양한 설정 값을보다 쉽게 조작 할 수있는 외부 장비입니다. 

반면에 많은 사용자들은 새로운 프로그램을 작성할 수있는 설정 장치로 TAO에 높은 평가를 받고 있습니다.

TAOII는 카테고리 및 코스 레이아웃에 따라 더 자세하고 자유로운 설정을 가능하게했습니다. 

각 주파수와 드라이브 / 브레이크는 말할 것도없고 Boost / Turbo 설정으로 연결됩니다. 이는 1 세대 TAO

Driver 사용자의 데이터를 기반으로 하며, 이러한 설정 값을 쉽게 확인할 수 있으며, 무선으로 AIRIA에서의 전송, 설정 변경도 가능합니다.

또한 주행 차량에 대한 각종 데이터의 변화를 표시 할 수있게되었습니다. (ESC / 모터 온도 및 배터리 전압 등)

또한 향후 출시 예정인 다양한 기기를 브레인 유닛을 통해 제어 할 수 있습니다.

TAOII는 차량 전체를 통합하는 완전히 새로운 개발형 이펙터입니다.

Features

1．Hi-Quality Smart-Design

The main body back panel is champagne gold aluminum billet.

2．Improved visibility

Driver can easily confirm each data by 2.2 inch color TFT display.

3．Touch scroll button is the first among the industry.

By the wheel pad, intuitive operability greatly improved.

4．Large expansion of the E.S.C. setting

It largely made various setting items expansion.
As a result, you can completely use original performance of AIRIA.
Main Features 

　a. Frequency setting
You can completely set each frequency to greatly influence operation feeling independently. (Technology only for Acuvance)
The set point came to be largely made in expansion, the details with 1 - 2KHz step in the range of 0.5KHz or 1KHz - 32KHz. 

　b. Power setting
Separately from frequency setting, you can set the strength of initial speed neutral brakes and brakes.
Every 2% step can set each setting in the range of 0-50 or 100%.

　c. Large expansion of the boost/turbo function
It has 11 kinds of setting with the popular boost/turbo function.
Because it went into details about a set point, not only the strong acceleration but also the slow control is possible.

　d. REV limiter
It can set the upper limit of motor RPM.

5．Abundant pre-set program

It is equipped with 5 kinds of programs to pre-set according to a category.
Because you can change all program to pre-set, you can easily enjoy setting.

6．Two-way communication via Bluetooth

It can transmit the contents which you set in TAOII to AIRIA via Bluethooth. In addition, you can confirm current setting of AIRIA with a screen of TAOII by wirelessly transmitting.

7．Vibration function

When it arrived at a battery voltage and E.S.C., the motor temperature that I set beforehand, the TAOII body vibrates and will tell a driver to avoid trouble by the generous load.

8.Data logger function

Various temperature, Battery voltages, Motor RPM, Throttle work etc.

9．Graph data information

In addition to current data, a graph displays data before the last time with 1 screen at three kinds, the same time.
(Technology only for Acuvance)
Because It can easily compare the change of the running condition by this function, you can confirm various hints for an operation level or improvement of the time at hand.

10． Micro SD Card

It memorize various set points and data using bundled Micro-SD card (4GB). Therefore, you can record information approximately endlessly. Furthermore, the exchanges of the data with the friend were enabled.

11．Expansion device terminal

You can do setting each function and the logging data of the multi vehicles which carried AIRIA only in one TAOII if you use the brain unit.

As for the connection of AIRIA and Brain Unit, the connection is possible in separate with an attached L-shaped connector cable other than a docking system. You can put them on various places.

Furthermore, you can control the various expansion devices that will be released through a brain unit in future via TAOII.

*A temperature sensor unit sold separately is necessary for the motor temperature detection.

Contents

ALL-IN-ONE PACKAGE ENTRY PACKAGE TAOⅡ 1 1 Instruction manual 1 1 AC adapter for charges 1 1 USB cable 1 1 MICRO SD card （4GB） 1 1 BRAIN-UNIT 1 ― Cable for connected AIRIA with BRAIN-UNIT 1 ― RX-Branch cable 1 ―

Specifications

Outward appearance	Pearl white (Back Panell : Billet aluminum / Hairline specifications / Champagne gold)
Outer Dimensions	52(W) × 105(H) × 11(D) mm
Weight	78g
Battery	Li-Po, DC3.7V,500mA/h
Charge Voltage	DC 5V
Display	2.2Inches TFT color LCD
Full Charge Time	2 hours
Operation Time	Consecutive use 5 hours