상품상세정보
[XP-90007] XPRESS GripXero D1 1/10 High Performance RWD Drift Car Kit (드리프트 후륜킷)
Feature:
Combining R&D obtained from the Xpresso and Execute series, the GripXero is born!
Featuring the best of both worlds, combining them together to produce a high performance RWD drift car!
With new elements such as the Inboard Front Suspension (IFS) to further tailor the chassis towards throwing large slides!
Xpreso와 Execute 시리즈에서 얻은 R&D를 결합하면 GripXero가 탄생한다!
양쪽의 장점을 모두 갖추고 있어 고성능 RWD 드리프트 자동차를 생산하기 위해 이들을 결합!
인보드 프론트 서스펜션(IFS)과 같은 새로운 요소를 통해 대형 슬라이드를 던질 수 있도록 섀시를 더욱 맞춤화하십시오!
Features:
- High Flex Matte 2.5mm Graphite Main Chassis
- High Flex Matte 2.0mm Graphite Vertical Topdeck With Changeable CG with Gyro Mount and Esc Mount
- High Flex Matte 3.0mm Graphite Lightweight Front and Rear Arms
- High Flex Matte 3.0mm Graphite Rear Shock Tower; low/high shock hole choice
- High Flex Matte 2.0mm Graphite Steering Arm , Light weight and high response
- Adjustable CG through Brass Gyro Mount
- High CG Esc Mount
- High CG Motor Mount with 3 different position, tune for different surfaces
- Aluminum Turnbuckles included
- Light weight Upper Arm design and adjustable Camber and Caster
- On Power Control System allowing for high speed drifting
- Hard Coated Aluminum layshaft, Lightweight and Strong
- Aluminum Pulley Set for instantaneous power delivery
- Aluminum Front Bulkhead Stiffener for more consistent drifting
- Aluminum Adjustable Knuckle for different ackermann settings
- Aluminum Dampers throughout, for predictable handling
- Front IFS Damper for more on-power traction
- Rear Chassis holes for use with a wide variety of Diffusers
하이 플렉스 매트 2.5mm 그래파이트 메인 섀시
자이로 마운트 및 Esc 마운트로 변경 가능한 CG로 고광택 매트 2.0mm 흑연 수직 탑덱
높은 플렉스 매트 3.0mm 흑연 경량 전후 암
높은 플렉스 매트 3.0mm 흑연 후방 충격 타워; 낮은 / 높은 충격 홀 선택
높은 플렉스 매트 2.0mm 흑연 스티어링 암, 경량 및 높은 응답
황동 자이로 마운트를 통해 조정 가능한 CG
높은 CG Esc 마운트
3 개의 다른 위치로 높은 CG 모터 마운트, 다른 표면을위한 조정
알루미늄 턴버클 포함
가벼운 무게 어퍼 암 디자인 및 조정 가능한 캠버 및 캐스터
고속 표류가 가능한 전력 제어 시스템
하드 코팅 알루미늄 레이 샤프트, 경량 및 강함
순시 전력 전달을위한 알루미늄 풀리 세트
일관된 표류를위한 알루미늄 전면 벌크 헤드 보강재
다른 ackermann 설정을위한 알루미늄 조정 너클
알루미늄 댐퍼를 통해 예측 가능한 취급 가능
더 많은 on-power 견인을위한 앞쪽의 IFS 댐퍼
다양한 디퓨저와 함께 사용하기위한 섀시 구멍
Specification:
- Length: 345mm (Including Foam Bumper) 전체길이
- Wheelbase: 256mm 휠베이스
차폭은 입고후 조립이후 기재하도록 하겠습니다.
Include:
- Xpress GripXero D1 1/10 High Performance RWD Drift Car Kit (1 pc) 고성능 RWD 드리프트 카 키트 (1 개)
Require: 완성시 필요한 기자재 (조립시 별도의 공구도 필요합니다)
- Radio system (transmitter and receiver) 송수신기
- Steering servo 서보
- Motor 모터
- Gyro 자이로
- Pinion gear (64p) 피니언 기어(64P로 되있으나 스퍼기어까지 48P로 교체하시면 됩니다.
- Battery pack 배터리
- Speed controller 변속기
- Charger 충전기
- Bodyshell (256 mm wheelbase) 바디(휠베이스:앞바퀴축과 뒷바퀴축의 간격)
- Wheels, Tires, Inserts 휠,타이어등
상단 센터에 장착할수있는 변속기(ESC)위치와 자이로 위치를 조절할수 있슴
카본 샤시 파츠
오일 디프기어방식으로 솔리드액슬로도 사용 가능
파워컨트롤에 맞게 리어 액티브토우, 캠버 조절가능한 턴버클
하이브리드 트랜스미션시스템. 벨트 구동형 기어들로 하이브리드 트랜스미션 시스템을 적용 (조향과 제동중에 휠에 동력을 공급해 움직임을 극대화 할수있는 시스템)
알루미늄 강도 높은 7075 턴버클 사용
탈부착이 쉬운 모터 피니언 기어와 스퍼기어들.
별도의 장치없이 프론트 캐스터각을 조절할수있는 허브장치
상단 벌크헤드에 홀이 있어 보다 다양하고 폭넓은 캠버조절.
쇽타워의 높이 조절가능 (2mm)
사뭇 다른 하부 쇽 마운트 포지션
파워를 좀더 느끼게 할수있는 프론트 서스펜션
좌우 타각(스티어링)시 잠김현상을 없앨수있는 스토퍼장치