상품상세정보
[XP-90007] XPRESS GripXero D1 1/10 High Performance RWD Drift Car Kit (드리프트 후륜킷)
Feature:
Combining R&D obtained from the Xpresso and Execute series, the GripXero is born!
Featuring the best of both worlds, combining them together to produce a high performance RWD drift car!
With new elements such as the Inboard Front Suspension (IFS) to further tailor the chassis towards throwing large slides!
Xpreso와 Execute 시리즈에서 얻은 R&D를 결합하면 GripXero가 탄생한다!
양쪽의 장점을 모두 갖추고 있어 고성능 RWD 드리프트 자동차를 생산하기 위해 이들을 결합!
인보드 프론트 서스펜션(IFS)과 같은 새로운 요소를 통해 대형 슬라이드를 던질 수 있도록 섀시를 더욱 맞춤화하십시오!
![]()
Features:
- High Flex Matte 2.5mm Graphite Main Chassis
- High Flex Matte 2.0mm Graphite Vertical Topdeck With Changeable CG with Gyro Mount and Esc Mount
- High Flex Matte 3.0mm Graphite Lightweight Front and Rear Arms
- High Flex Matte 3.0mm Graphite Rear Shock Tower; low/high shock hole choice
- High Flex Matte 2.0mm Graphite Steering Arm , Light weight and high response
- Adjustable CG through Brass Gyro Mount
- High CG Esc Mount
- High CG Motor Mount with 3 different position, tune for different surfaces
- Aluminum Turnbuckles included
- Light weight Upper Arm design and adjustable Camber and Caster
- On Power Control System allowing for high speed drifting
- Hard Coated Aluminum layshaft, Lightweight and Strong
- Aluminum Pulley Set for instantaneous power delivery
- Aluminum Front Bulkhead Stiffener for more consistent drifting
- Aluminum Adjustable Knuckle for different ackermann settings
- Aluminum Dampers throughout, for predictable handling
- Front IFS Damper for more on-power traction
- Rear Chassis holes for use with a wide variety of Diffusers
하이 플렉스 매트 2.5mm 그래파이트 메인 섀시
자이로 마운트 및 Esc 마운트로 변경 가능한 CG로 고광택 매트 2.0mm 흑연 수직 탑덱
높은 플렉스 매트 3.0mm 흑연 경량 전후 암
높은 플렉스 매트 3.0mm 흑연 후방 충격 타워; 낮은 / 높은 충격 홀 선택
높은 플렉스 매트 2.0mm 흑연 스티어링 암, 경량 및 높은 응답
황동 자이로 마운트를 통해 조정 가능한 CG
높은 CG Esc 마운트
3 개의 다른 위치로 높은 CG 모터 마운트, 다른 표면을위한 조정
알루미늄 턴버클 포함
가벼운 무게 어퍼 암 디자인 및 조정 가능한 캠버 및 캐스터
고속 표류가 가능한 전력 제어 시스템
하드 코팅 알루미늄 레이 샤프트, 경량 및 강함
순시 전력 전달을위한 알루미늄 풀리 세트
일관된 표류를위한 알루미늄 전면 벌크 헤드 보강재
다른 ackermann 설정을위한 알루미늄 조정 너클
알루미늄 댐퍼를 통해 예측 가능한 취급 가능
더 많은 on-power 견인을위한 앞쪽의 IFS 댐퍼
다양한 디퓨저와 함께 사용하기위한 섀시 구멍
Specification:
- Length: 345mm (Including Foam Bumper) 전체길이
- Wheelbase: 256mm 휠베이스
차폭은 입고후 조립이후 기재하도록 하겠습니다.
Include:
- Xpress GripXero D1 1/10 High Performance RWD Drift Car Kit (1 pc) 고성능 RWD 드리프트 카 키트 (1 개)
Require: 완성시 필요한 기자재 (조립시 별도의 공구도 필요합니다)
- Radio system (transmitter and receiver) 송수신기
- Steering servo 서보
- Motor 모터
- Gyro 자이로
- Pinion gear (64p) 피니언 기어(64P로 되있으나 스퍼기어까지 48P로 교체하시면 됩니다.
- Battery pack 배터리
- Speed controller 변속기
- Charger 충전기
- Bodyshell (256 mm wheelbase) 바디(휠베이스:앞바퀴축과 뒷바퀴축의 간격)
- Wheels, Tires, Inserts 휠,타이어등
![]()
![]()
상단 센터에 장착할수있는 변속기(ESC)위치와 자이로 위치를 조절할수 있슴
![]()
카본 샤시 파츠
![]()
오일 디프기어방식으로 솔리드액슬로도 사용 가능
![]()
파워컨트롤에 맞게 리어 액티브토우, 캠버 조절가능한 턴버클
![]()
하이브리드 트랜스미션시스템. 벨트 구동형 기어들로 하이브리드 트랜스미션 시스템을 적용 (조향과 제동중에 휠에 동력을 공급해 움직임을 극대화 할수있는 시스템)
![]()
알루미늄 강도 높은 7075 턴버클 사용
![]()
탈부착이 쉬운 모터 피니언 기어와 스퍼기어들.
![]()
별도의 장치없이 프론트 캐스터각을 조절할수있는 허브장치
![]()
상단 벌크헤드에 홀이 있어 보다 다양하고 폭넓은 캠버조절.
![]()
쇽타워의 높이 조절가능 (2mm)
![]()
사뭇 다른 하부 쇽 마운트 포지션
![]()
파워를 좀더 느끼게 할수있는 프론트 서스펜션
![]()
좌우 타각(스티어링)시 잠김현상을 없앨수있는 스토퍼장치
![]()